
²

1.زѹ'.rar'ļ

2.ͨUSBӵԼ

3.ͨ

4.,Լ5ϻʾSome data was send

5.UpgradeťʱĻʾSYSTEM UPDATE PLEASE WAIT.....;

6.ʾUpgrade Completeʾɹ

7.ɣֱָͨá

 棺
1. ȷʹõĵѾӵأ

2.УжϵԵԴжϵ֮ӣ𻵳




Please follow steps below to update the firmware,
1. Download and extract the upgrade application;
2.Connect the PC and charger via USB cable.
3.Power on the charger.
4.Start the Upgrade Program in PC, and it will display Some data was send after 5 seconds.
5.Click Upgrade button in the program, and the charger screen will display SYSTEM UPDATE PLEASE WAIT......
6.When the program displays Upgrade Complete, the upgrading process finishes.
7. Please load factory settings in both channels after the upgrade process is done.

 
Warning:
1.Make sure the PC connects to the ground line or the charger will get damaged.
2.Do NOT interrupt the data transfer, and do NOT disturb the process, the device, the PC,for example by plugging or unplugging other USB devices at any time during the updating procedure because this would lead to permanent damage of the device.